The following editor will give you an introduction on how to prevent discoloration of preservative wood? 1. Wood is easily affected by the external environment, causing the texture of the wood surface to be loose, rough, discolored, discolored, and even the wood loses surface adhesion fibers and breaks, cracks or brittle fragments gradually fall off 2. Photochromic: Some substances in wood choose to absorb light with a wavelength greater than 290nm, and the electrons change between energy levels to form a photochromic chemical bond, leading to a change in wood color. 3. Prevent photochromism: block ultraviolet light and ultraviolet rays; change the structure of light-absorbing components in the material, destroy the structure of discolored substances, thereby isolating oxygen and trapping atomic oxygen, trapping free radicals and extracting solvents 4. The composite natural polymer compound is mainly composed of cellulose, hemicellulose, lignin and a small amount of extract. It not only contains chromophore groups such as carbonyl carboxyl unsaturated double bonds and conjugate systems, but also contains chromophores such as hydroxyl groups.
The following editor will introduce to you how to repair and prevent anticorrosive wood flooring? 1. Large-area anti-corrosion wood: If the floor is large-area anti-corrosion wood caused by various reasons, and the amount of water is large, please notify the customer service of the floor manufacturer while cleaning the site, and remove the floor in the shortest possible time. Because rooms other than bathrooms and kitchens are generally not waterproof, it is necessary to clean up the water on the ground as soon as possible to avoid soaking downstairs and causing greater losses. 2. Local anti-corrosion wood: cut off the water source and clean the water on the ground in time, observe whether the floor has obvious changes, and if there is obvious warping reaction, the floor manufacturer can be notified to perform partial replacement, and the worker will perform partial removal according to the site conditions and calculate Provide the floor area required for maintenance and calculate the related costs. 3. The floor needs to be replaced locally: before the worker comes to the door, you need to check the inventory and batch of the floor to be replaced, because only the floor with the same color and specification as the original floor can be used, otherwise it cannot be repaired. 4. Overall replacement, partial replacement of the floor: *Fortunately, under the condition of maintaining normal ventilation, let the floor dry for about two weeks, and then reinstall it after the floor is dry. Anti-corrosion wood floor is the name of the finished product after ordinary wood is processed with anti-corrosion treatment. After the anti-corrosion treatment, the performance of ordinary wood floor is greatly improved to achieve the functions of anti-corrosion, mildew, moth and termite. Anticorrosive wood flooring is one of the most widely used outdoor wood. Open-air wooden floors specially used in outdoor environments, and can be directly used in environments that are in contact with water and soil. They are outdoor wooden floors, garden landscape floors, outdoor wooden platforms, terrace floors, outdoor wooden planks and other outdoor anticorrosive wood pergola material.
The following is an introduction to the application of anti-corrosion wood in home decoration. At present, more and more people in our country have lived in anti-corrosion wood cabins. In addition, they have set up some anti-corrosion wood furniture or other anti-corrosion wood objects in their courtyards, which enhances the overall atmosphere of the home. It is not very expensive. Although the surface does not look smooth, of course and corrosion resistance are its key design styles. In theory, wood with certain anti-corrosion properties can be called anti-corrosion wood, so it is stored There are three types of natural preservative wood, carbonized wood and artificial preservative wood. From a category perspective, preservative wood generally refers to wood that has been solved by additives, that is, artificial preservative wood. Preservative wood flooring can make the atmosphere of home furniture look retro and fashionable Simple. At this stage, the definition of green and environmental protection is advocated. The use of wood raw materials and the enjoyment of real life homes can be regarded as the feeling of the royal family. Naturally, people should be more cherished. Of course, the maintenance of the ecological system changes from quantity to quality. The material itself Decide on the requirements for the loading amount and the environmental protection of the anti-corrosion wood, so the wood types of the anti-corrosion wood must be carefully selected. For example, the Nordic wind wood is produced in cold regions and has an inseparable structure. It has natural anti-corrosion properties. The loading dose of anti-corrosion wood is lower than other fast-growing woods, but its performance indicators are good and suitable for civilian use. Some green plants grow and develop faster, have small root materials and have poor natural resistance. The dosage is very large, the component value is high, and the environmental protection is poor.
The editor below will give you an introduction about the production cost of the anticorrosive wood pavilion. Although there are many anti-corrosion woods on the market and their prices are different, the direct cause is the type and grade of wood used for anti-corrosion wood. The current usage rate is the highest, and it is also recognized by the public as preservative wood, such as Pinus sylvestris, Douglas pine, pineapple grains and wood. Compared with other wood preservatives, the color sapwood of Pinus sylvestris. Close to white or light yellow or orange. The internal density is medium density, so the overall texture is relatively soft, so the anti-corrosion performance of this kind of anti-corrosion wood is very good, and the price is between 2400 yuan/square-2900 yuan/square. Anti-corrosion wood is the price of many anti-corrosion wood, the average price is 9,000 yuan / cubic. Therefore, most of them are used for decoration, because natural brick red looks beautiful and high-end, so when used with other materials, it can be used as decoration.
The following editor will introduce to you the specific processing details of preservative wood. Wood has the characteristics of stronger stability and longer preservative time through preservative soaking. Not only has a strong antiseptic effect, but also prevents molds, termites and insects from harming wood. Therefore, the treated wood can be kept in the harsh environment for a long time without showing damage. This process is a key step in preservative treatment. The wood put in preservatives undergoes physical and chemical reactions, and the starch, cellulose and sugars in the wood are changed, and then to increase the preservative effect of the wood and improve the preservative function of the wood in the wild. The preservative will continuously and evenly penetrate into the middle area of the wood, continuously completing the preservative components of starch, cellulose and sugar and the chemical reaction process of wood. Then the wood strengthens rot fungi and insects to cause further damage. Because of changes in the environment, the structure of wood cells will change. The process of natural air drying can be very well adapted to wild wooden floors and special anticorrosive wooden floors in the wild. This is the process of fixing the largest mutation to avoid any hazards in use.
Vacuum high-pressure soaking is the key link of Jiangxi anticorrosive wood railing. By injecting preservatives into wood, it can kill biological components such as starch, cellulose, sugar, etc., further destroy the living environment of bacteria, pests and diseases, and improve its antiseptic performance. High-temperature characteristics High-temperature qualitativeness is a further improvement of Jiangxi anticorrosive wood railings based on vacuum and high-pressure soaking. At high temperatures, preservatives can effectively and deeply penetrate into the interior of the fence, continuously ending the possible biological decay components in the wood, and continuously compressing and even eliminating the growth space of pests and bacteria. Natural air drying Natural air drying has two functions. The first is to stabilize the performance of the preservative in the first two stages and continuously distribute the excess preservative; the second is to adapt the anticorrosive wood fence to the future use environment, and form a stable wooden unit layout as soon as possible to adapt to future use. Natural air drying is usually the last step in the preservative treatment of wooden fences, and its stability is related to the end use of wooden fences. Anticorrosive wood fences are generally put into use directly through natural air drying.
The following editor will introduce to you what are the installation requirements for anticorrosive wood door heads? 1. Layout first, draw a good line, and set a good point; 2. Hit the keel at the designated point; 3. Then pass the keel through the steel gusset, which is used to fix the ecological wood ceiling; 4. Pull the wires, and then buckle up the ceiling piece by piece.
The following editor will introduce to you the methods to prevent the anticorrosive wood pavilion from cracking. 1. At the construction site, anticorrosive wood should be ventilated and stored, and sun exposure should be avoided as much as possible; 2. During the installation of anti-corrosion wood, within 48 hours after the wood surface is painted with paint, people should avoid walking or moving heavy objects to avoid forming a protective film on the surface of the anti-corrosion wood; 3. During the design and construction, the air circulation between the anti-corrosion and the ground should be fully maintained, which can more effectively extend the life of the wooden structure base layer; 4. The hardware is made of stainless steel, hot-dip galvanized or copper. Please pre-drill holes when connecting and installing to avoid cracking of anti-corrosion wood. The protective coating of anti-corrosion wood is generally permeable, which can effectively prevent water from corroding wood. The cleaning and protection in the future can be cleaned with general detergent, which will not affect its anti-corrosion performance.
The answer is yes. Anticorrosive wood is suitable for indoor and outdoor ground and various applications such as: wooden houses, outdoor furniture, wooden planks, trestle bridges, wooden floors, fences, outdoor recreational facilities, wooden bridges, steps, stairs, walkways, docks, Swimming pool, wooden poles, and various gardening materials. The wood treated with ACQ wood preservative is generally green, and then gradually becomes warm brown for a period of time. After outdoor use, it does not affect the painting and coloring. Preservative wood is a new generation of environmentally friendly wood preservatives, and the development of wood preservatives is faster than CCA wood preservatives. In developed countries such as Europe and the United States, arsenic and chromium have been gradually replaced by CCA wood preservatives, and they are widely spread around the world. Everywhere.
The foundation is the foundation of construction, and it must be done. How to do it depends on the topography and size of the site. Generally, a formal log house company will go to the site to check it, and then tell you how to make a design plan for you, etc. It is recommended to find a professional person to do the house building. This is the foundation built on a slope, so one side is high and the other is low. The quality of the wooden house column foundation should also be paid attention to, depending on the soil quality of the specific building location, and there should be column feet. Wooden foundation construction generally uses concrete pouring methods, and then wooden structures are built on this foundation. In other words, the foundation of a wooden house is generally not made of stacked wood. And the wooden house foundation generally includes foundation walls and foundation pillars, as well as footings. If a basement or crawl space or overhead layer is designed in the foundation wall, concrete slabs of the same height as the floor may be laid between the foundation walls. Although the basic structure is the most basic part of the wooden building structure, its role is very huge, and it must be able to withstand the load transmitted by its own weight and its superstructure. But when it comes to construction costs, because the weight of wooden structures is lighter than that of concrete and rigid structures, and is limited to three floors, the foundation is small and construction costs are saved. Weining Anticorrosive Wood Corridor, Shanxi Anticorrosive Wood Corridor, Lishui Anticorrosive Wood Corridor Construction Manufacturer
The installed anti-corrosion wood should be preserved in its existing shape as much as possible. If there is a damaged part of the anti-corrosion wood, it must be painted with antiseptic and outdoor protective coatings for protection; because the anti-corrosion wood is semi-finished wood, its rough part should be After a period of time after the completion of the construction, wait for the moisture content to drop below 20%, and then sand it again. After cleaning the surface of the anticorrosive wood, you can also apply outdoor protective coatings, which will have better quality. Preservatives are processed by preservatives, and whether preservatives are harmful to the human body, and what kind of preservative processing must be selected to be safer, these are probably issues that consumers care about. The early anticorrosive wood used CCA-C wood preservative, which has certain toxicity. At present, the new national wood use standard has been issued, which strictly stipulates the use standard of preservatives, and prohibits the use of pollution sources and arsenic-containing antiseptics Agent. It is recommended to use copper azole, ACQ, Teb wood preservatives. The preservative wood processed by these preservatives has passed environmental protection standards and its toxicity is greatly reduced. You can rest assured to buy. Anti-corrosion wood flooring is one of the main uses of anti-corrosion wood. In addition, anti-corrosion wood can also be used to make other outdoor products, such as tables and chairs, swings, grape racks, and even wooden houses, just like our families abroad. It is common in the courtyard. Nowadays, more and more people in China are living in villas. It is also a kind of fun to set up some anticorrosive wood furniture in their yards. The price of anticorrosive wood furniture is not expensive, and is similar to that of ordinary furniture. Although it looks rough in appearance, it is more in line with the natural style. But will the anticorrosive effect of anticorrosive wood be destroyed by cutting? This is not to worry, because of its processing technology, no matter how you manipulate it, its anti-corrosion performance will not be affected.
1. When installing the floor with anticorrosive wood, the width of the keel should be 50 cm, not too wide or too narrow. When handling the keel, you should also use anti-corrosion materials to delay the life of the entire floor. When laying the floor, pay attention to distinguish the front and back of the anti-corrosion material, and place the relatively well-treated side on the upside to make it wear longer. 2. There is no need to add any protective coatings when installing, and the anti-corrosion wood itself has anti-corrosion effect and has a certain degree of protection. If consumers are not very satisfied with the color of the anti-corrosive wood they have purchased, when they need to change the treatment, it is recommended to use oil-based or water-based paint for treatment, so that the performance of the two coatings can coexist and will not affect the anti-corrosion wood. Cause damage. Types of frost damage and key tips for rescue wood manufacturers: 1. Broken shoots (including broken stems). This kind of damaged forest trees cannot regain their growth after the snow melts and needs to be cleared and used in time. 2. Bend and oblique. Most of these damaged trees can be restored to their original state after the snow melts, and they have little impact on growth and development and need to be preserved. During the snow pressure period, the snow on the tree canopy should be removed to the greatest extent in time.
The white spots on the surface of anticorrosive wood are caused by poor moisture and ventilation. Solution: White spots, do not do any treatment now, it will not affect the service life of the anti-corrosion wood itself. When it is winter, use a steel wire ball to polish the white spots off the surface of the anti-corrosion wood and then paint the wood oil again. Do the same treatment in summer. . Anticorrosive wood means that ordinary wood is artificially added with chemical preservatives to make it have anti-corrosion, moisture-proof, anti-fungal, insect-proof, anti-mildew and waterproof properties. It can directly contact soil and humid environment, and is often used in outdoor floors, engineering, landscapes, anti-corrosion wood flower stands, etc., for people to rest and appreciate the natural beauty. It is an ideal material for outdoor floors, garden landscapes, wooden swings, entertainment facilities, wooden planks, etc. , It is favored by garden designers, but with the development of science and technology, Bijie anticorrosive wood is already very environmentally friendly, so it is often used in interior decoration, flooring and furniture. Interior decoration designers also like anticorrosive wood very much.
1. When installing the floor with anticorrosive wood, the width of the keel should be 50 cm, not too wide or too narrow. When handling the keel, you should also use anti-corrosion materials to delay the life of the entire floor. When laying the floor, pay attention to distinguish the front and back of the anti-corrosion material, and place the relatively well-treated side on the upside to make it wear longer. 2. There is no need to add any protective coatings when installing, and the anti-corrosion wood itself has anti-corrosion effect and has a certain degree of protection. If consumers are not very satisfied with the color of the anti-corrosive wood they have purchased, when they need to change the treatment, it is recommended to use oil-based or water-based paint for treatment, so that the performance of the two coatings can coexist and will not affect the anti-corrosion wood. Cause damage. Types of frost damage and key tips for rescue wood manufacturers: 1. Broken shoots (including broken stems). This kind of damaged forest trees cannot regain their growth after the snow melts and needs to be cleared and used in time. 2. Bend and oblique. Most of these damaged trees can be restored to their original state after the snow melts, and they have little impact on growth and development and need to be preserved. During the snow pressure period, the snow on the tree canopy should be removed to the greatest extent in time. Zhuhai anti-corrosion wood corridor manufacturers pioneer and innovate, Ningxia anti-corrosion wood corridor manufacturers call, Fuzhou anti-corrosion wood corridor sales professional and persistent
